Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
Features:
Trailer hub assembly fits idler axles
Bearings, races, seal, grease cap, and lug nuts are included
Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
Sturdy iron construction
Zinc-enriched paint finish
Pre-greased idler hub is easy to install - no need to pack bearings
Lithium complex, multipurpose grease keeps bearings lubricated
QAI and CSA certified
Specs:
Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
Wheel size: 13" to 15"
Bolt pattern: 5 on 4-1/2"
Wheel stud dimensions: 1/2" diameter x 1-5/16" long
Grease cap flange diameter: 1.99"
Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
Bearings (included)
Inner bearing: L68149 (1.378" inner diameter)
Outer bearing: L44649 (1.063" inner diameter)
Races (included)
Inner race: L68111
Outer race: L44610
Grease seal (included): 58846
Inner diameter: 1.719"
Outer diameter: 2.565"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle or etrailer Easy Grease to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 3-8 working days.
Share
Let customers speak for us
from 1015 reviewsPerfect fit. Came with everything I needed and on time to.
Works as it should.
Strong power
item as described, prompt shipping, great communication, thank you.
As good as expectation, perform well.
Good running carburetor. This carburetor runs very well, I just adjusted the choke each morning for a few days to get the cold start choke setting where I wanted it then adjusted the air fuel screws and it starts and runs really well i'm impressed for the price.
Easy install and fit perfectly. Good pressure for the washer fluid.
Great Service, really realiable.
Yes, will install it tomorrow
Just good
no more problem with the engine light thank you so much
The original one is hard to find, this one is a decent replacement.
This is exactly what I was looking for. I got some drag bars and I needed to raise it up one inch to clear the top of the front forks.
These work perfect, no issues and they look good in black.
Sure enough perfect match went rite in place of the old one. Put the bike back together and soon as it got fuel she fired up. First time in 8 years. Having an issue with getting rpm out of it without stalling but I will mess with it.
Clutch on bike is seized up so I can’t ride to test out but it so far has done what I want and that’s running bike to work with. Can’t fully blame the carb due to other un known issues with old bike but time will tell. So far I’m thrilled this carb got the bike running rite out of the box
Fix my error code problem